Contact Us!

مخازن تحت فشار

loading...

پایپینگ

loading...

کتابخانه QCEXPERT.ir

loading...

استانداردهای کاربردی

loading...

 

 

List of Documents

Aerospace & Defense

AED-1-2018

Aerospace and Advanced Engineering Drawings

Air and Gas Treatment

AG-1-2017

Code on Nuclear Air and Gas Treatment

N509-2002

Nuclear Power Plant Air-Cleaning Units and Components (N509 - 2002)

N511-2007

In-Service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air-Conditioning Systems (N511 - 2007)

 

 

Assembly

B18.2.1-2012

Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) (B18.2.1 - 2012)

Biomedical Devices

PVHO-1-2016

Safety Standard for Pressure Vessels for Human Occupancy

PVHO-2-2016

Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines

Bioprocess

BPE-2016

Bioprocessing Equipment

Blanks

B16.48-2015

Line Blanks

Boiler Pressure Vessel Code (BPVC)

BPVC.CC.BPV-2017

Code Cases: Boilers and Pressure Vessels

BPVC.CC.NC-2017

Code Cases: Nuclear Components

BPVC.I-2017

Rules for Construction of Power Boilers

BPVC.II.A-2017

Materials-Part A-Ferrous Materials Specifications (Beginning to SA-450)

BPVC.II.A-2017 PART 2

Materials-Part A-Ferrous Materials Specifications (SA-451 to End)

BPVC.II.B-2017

Materials-Part B-Nonferrous Material Specifications

BPVC.II.C-2017

Materials Part C-Specifications for Welding Rods Electrodes and Filler Metals

BPVC.II.D.C-2017

Materials-Part D-Properties-(Customary)

BPVC.II.D.M-2017

Materials-Part D-Properties-(Metric)

BPVC.III.1.NB-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NB-Class 1 Components

BPVC.III.1.NC-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NC-Class 2 Components

BPVC.III.1.ND-2017

Rules for Constructions of Nuclear Facility Components-Division 1-Subsection ND-Class 3 Components

BPVC.III.1.NE-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NE-Class MC Components

BPVC.III.1.NF-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NF-Supports

BPVC.III.1.NG-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NG-Core Support Structures

BPVC.III.1.NH-2015

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NH-Class 1 Components in Elevated Temperature Service

BPVC.III.2-2017

Rules for Construction of Nuclear Facility Components-Division 2-Code for Concrete Reactor Vessels and Containments

BPVC.III.3-2017

Rules for Construction of Nuclear Facility Components-Divison 3-Containment Systems for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material

BPVC.III.5-2017

Rules for Construction of Nuclear Facility Components-Division 5-High Temperature Reactors

BPVC.III.A-2017

Rules for Construction of Nuclear Facility Components-Division 1-Appendices

BPVC.III.NCA-2017

Rules for Constructions of Nuclear Facility Components-Subsection NCA-General Requirements for Division 1 and Division 2

BPVC.IV-2017

Rules for Construction of Heating Boilers

BPVC.IX-2017

Welding, Brazing, and Fusing Qualifications

BPVC.V-2017

Nondestructive Examination

BPVC.VI-2017

Recommended Rules for the Care and Operation of Heating Boilers

BPVC.VII-2017

Recommended Guidelines for the Care of Power Boilers

BPVC.VIII.1-2017

Rules for Construction of Pressure Vessels Division 1

BPVC.VIII.2-2017

Rules for Construction of Pressure Vessels Division 2-Alternative Rules

BPVC.VIII.3-2017

Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels

BPVC.X-2017

Fiber-Reinforced Plastic Pressure Vessels

BPVC.XI-2017

Rules for Inservice Inspection of Nuclear Power Plant Components

BPVC.XII-2017

Rules for Construction and Continued Service of Transport Tanks

Care & Operation

EA-1G-2010

Guidance for ASME EA-1, Energy Assessment for Process Heating Systems [ANSI designation: ASME TR EA-1G-2010] (EA-1G - 2010)

EA-3-2009

Energy Assessment for Steam Systems (EA-3 - 2009)

PTB-2-2009

Guide to Life Cycle Management of Pressure Equipment Integrity (PTB-2 - 2009)

Certification and Training

CA-1-2014

Conformity Assessment Requirements (CA-1 - 2014)

Chains

B29.1-2011

Precision Power Transmission Roller Chains, Attachments, and Sprockets (B29.1 - 2011)

B29.2M-2007

Inverted Tooth (Silent) Chains and Sprockets (B29.2M - 2007)

B29.8-2010

Leaf Chains, Clevises, and Sheaves (B29.8 - 2010)

B29.10M-1997

Heavy Duty Offset Sidebar Power Transmission Roller Chains and Sprocket Teeth (B29.10M - 1997)

B29.15M-1997

Steel Roller Type Conveyor Chains, Attachments, and Sprocket Teeth (B29.15M - 1997)

B29.21-2013(R2018)

700 Class Chains, Attachments, and Sprockets for Water and Sewage Treatment Plants (B29.21 - 2013)

B29.22-2001

Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs (B29.22 - 2001)

B29.26-2013

Fatigue Testing Power Transmission Roller Chain (B29.26 - 2013)

B29.27-2002

Single Pitch and Double Pitch Hollow Pin Conveyor Chains and Attachments (B29.27 - 2002)

B29.28-2015

High Strength Chains for Power Transmission and Tension Linkages

B29.200-2001

Welded-Steel-Type Mill Chains, Welded-Steel-Type Drag Chains, Attachments, and Sprocket Teeth (B29.200 - 2001)

B29.300-2015

Agricultural, Detachable, and Pintle Chains, Attachments, and Sprockets

Combustion & Heat Transfer

PTC 51-2011

Gas Turbine Inlet Air-Conditioning Equipment (PTC 51 - 2011)

Computer Aided Design (CAD)

Y14.2-2014

Line Conventions and Lettering (Y14.2 - 2014)

Y14.47-2019

Model Organization Practices

Construction

A112.4.4-2017

Plastic Push-Fit Drain, Waste, and Vent (DWV) Fittings

A112.6.2-2017

Framing-Affixed Supports (Carriers) for Off-the-Floor Plumbing Fixtures

A112.6.3-2019

Floor and Trench Drains

A112.18.6/CSA B125.6-17-2017

Flexible Water Connectors

A112.19.3/CSA B45.4-17-2017

Stainless Steel Plumbing Fixtures (with Errata August 2017)

ASSE 1016-2017/ASME A112.1016-2017/CSA B125.16-17

Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations

B31.9-2017

Building Services Piping

B31T-2018

Standard Toughness Requirements for Piping

BPVC.I-2017

Rules for Construction of Power Boilers

BPVC.II.A-2017 PART 2

Materials-Part A-Ferrous Materials Specifications (SA-451 to End)

BPVC.II.A-2017

Materials-Part A-Ferrous Materials Specifications (Beginning to SA-450)

BPVC.II.B-2017

Materials-Part B-Nonferrous Material Specifications

BPVC.II.C-2017

Materials Part C-Specifications for Welding Rods Electrodes and Filler Metals

BPVC.II.D.C-2017

Materials-Part D-Properties-(Customary)

BPVC.II.D.M-2017

Materials-Part D-Properties-(Metric)

BPVC.IV-2017

Rules for Construction of Heating Boilers

BPVC.VI-2017

Recommended Rules for the Care and Operation of Heating Boilers

BPVC.VII-2017

Recommended Guidelines for the Care of Power Boilers

CSD-2018

Controls and Safety Devices for Automatically Fired Boilers

FE-1-2018

Rules for Construction of Fusion Energy Devices

PTB-1-2014

ASME Section VIII Division 2 Criteria and Commentary (PTB-1 - 2014)

Controls & Devices

CSD-1-2012

Controls and Safety Devices for Automatically Fired Boilers (CSD-1 - 2012)

Conveyers

B29.100-2011

Double-Pitch Roller Chains, Attachments, and Sprockets (B29.100 - 2011)

Coordinate Measuring Machine

B89.4.10-2000

Methods for Performance Evaluation of Coordinate Measuring System Software (B89.4.10 - 2000)

B89.4.19-2006

Performance Evaluation of Laser-Based Spherical Coordinate Measurement Systems (B89.4.19 - 2006)

B89.4.22-2004

Methods for Performance Evaluation of Articulated Arm Coordinate Measuring Machines (CMM) (B89.4.22 - 2004)

B89.4.10360.2-2008

Acceptance Test and Reverification Test for Coordinate Measuring Machines (CMMs) Part 2: CMMs Used for Measuring Linear Dimensions (Technical Report) (B89.4.10360.2 - 2008)

Cranes and Hoists

B29.24-2002

Roller Load Chains for Overhead Hoists (B29.24 - 2002)

B30.3-2016

Tower Cranes

B30.4-2015

Portal and Pedestal Cranes (B30.4 - 2015)

B30.5-2014

Mobile and Locomotive Cranes (B30.5 - 2014)

B30.6-2015

Derricks (B30.6 - 2015)

B30.7-2016

Winches

B30.8-2015

Floating Cranes and Floating Derricks (B30.8 - 2015)

B30.9-2018

Slings

B30.14-2015

Side Boom Tractors (B30.14 - 2015)

B30.16-2012

Overhead Hoists (Underhung) (B30.16 - 2012)

B30.17-2015

Cranes and Monorails (With Underhung Trolley or Bridge)

B30.18-2016

Stacker Cranes (Top or Under Running Bridge, Multiple Girder with Top or Under Running Trolley Hoist)

B30.20-2013

Below-the-Hook Lifting Devices (B30.20 - 2013)

B30.21-2014

Lever Hoists (B30.21 - 2014)

B30.22-2016

Articulating Boom Cranes

B30.25-2018

Scrap and Material Handlers

B30.29-2018

Self-Erecting Tower Cranes

B30.30-2019

Ropes

HRT-1-2016

Rules for Hoisting, Rigging, and Transporting Equipment for Nuclear Facilities

HST-1-2017

Performance Standard for Electric Chain Hoists

HST-2-2014

Performance Standard for Hand Chain Manually Operated Chain Hoists (HST-2 - 2014)

HST-3-1999

Performance Standard for Manually Lever Operated Chain Hoists (HST-3 - 1999)

HST-4-2016

Performance Standard for Overhead Electric Wire Rope Hoists

HST-5-2014

Performance Standard for Air Chain Hoists (HST-5 - 2014)

HST-6-2015

Performance Standard for Air Wire Rope Hoists

NOG-1-2015

Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder) (NOG-1 - 2015)

NUM-1-2016

Rules for Construction of Cranes, Monorails, and Hoists (with Bridge or Trolley or Hoist of the Underhung Type)

P30.1-2014

Planning for Load Handling Activities (P30.1 - 2014)

Cutting Tools

B94.2-1995

Reamers (B94.2 - 1995)

B94.6-1984

Knurling (B94.6 - 1984)

B94.7-1980

Hobs (B94.7 - 1980)

B94.11M-1993

Twist Drills (B94.11M - 1993)

B94.19-1997

Milling Cutters and End Mills (B94.19 - 1997)

B94.21-1968

Gear Shaper Cutters (B94.21 - 1968)

B94.33.1-1998

Jig Bushings, Metric (B94.33.1 - 1998)

B94.35-1972

Drill Drivers, Split-Sleeve, Collet Type (B94.35 - 1972)

B94.37M-1979

Roller Turner Type Cutting Tools Single Point (B94.37M - 1979)

B94.49-1975

Spade Drill Blades and Spade Drill Holders (B94.49 - 1975)

B94.51M-1999

Specifications for Band Saw Blades (Metal Cutting) (B94.51M - 1999)

B94.52M-1999

Specifications for Hack Saw Blades (B94.52M - 1999)

B94.53-1978

Solid Steel Rectangular Metal Cutting Squaring Shear Knives-Dimensional Tolerances (B94.53 - 1978)

B94.54-1999

Specifications for Hole Saws, Hole Saw Arbors, and Hole Saw Accessories (B94.54 - 1999)

B94.55M-1985

Tool Life Testing with Single - Point Turning Tools (B94.55M - 1985)

Design Process

B89.1.14-2018

Calipers

SRB-1-2018

Design, Installation, Maintenance, and Application of Ball Slewing Ring Bearings

Y14.6-2001(R2018)

Screw Thread Representation

Y14.8-2009

Casting, Forgings, and Molded Parts (Y14.8 - 2009)

Y14.36-2018

Surface Texture Symbols

Y14.43-2011

Dimensioning and Tolerancing Principles for Gages and Fixtures (Y14.43 - 2011)

Design, Fabrication, and Construction

B31P-2017

Heat Treatments for Fabrication Processes

BPVC.III.1.NH-2015

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NH-Class 1 Components in Elevated Temperature Service

BPVC.IX-2017

Welding, Brazing, and Fusing Qualifications

TDP-2-2012

Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Nuclear-Fueled Plants

Dimensional Metrology

B89.1.7-2009

Performance Standard for Steel Measuring Tapes (B89.1.7 - 2009)

B89.1.8-2011

Performance Evaluation of Displacement-Measuring Laser Interferometers (B89.1.8 - 2011)

B89.1.17-2001

Measurement of Thread Measuring Wires (B89.1.17 - 2001)

B89.3.4-2010

Axes of Rotation: Methods for Specifying and Testing (B89.3.4 - 2010)

B89.6.2-1973

Temperature and Humidity Environment for Dimensional Measurement (B89.6.2 - 1973)

B89.7.1-2016

, Guidelines for Addressing Measurement Uncertainty in the Development and Application of ASME B89 Standards [Technical Report]

B89.7.2-2014

 

B89.7.5-2006

Metrological Traceability of Dimensional Measurements to the SI Unit of Length (An ASME Technical Report) (B89.7.5 - 2006)

Drafting

Y14.1-2012

Decimal Inch Drawing Sheet Size and Format (Y14.1 - 2012)

Y14.1M-2012

Metric Drawing Sheet Size and Format (Y14.1M - 2012)

Y14.3-2012(R2018)

Orthographic and Pictorial Views

Y14.5.2-2017

Certification of Geometric Dimensioning and Tolerancing Professionals

Y14.24-2012

Types and Applications of Engineering Drawings (Y14.24 - 2012)

Y14.31-2014

Undimensioned Drawings (Y14.31 - 2014)

Y14.35-2014

Revision of Engineering Drawings and Associated Documents (Y14.35 - 2014)

Y14.37-2012

Composite Part Drawings (Y14.37 - 2012)

Y14.38-2007

Abbreviations and Acronyms for Use on Drawings and Related Documents (Y14.38 - 2007)

Y14.44-2008

Reference Designations for Electrical and Electronics Parts and Equipment (Y14.44 - 2008)

Y14.46-2017

Product Definition for Additive Manufacturing

Y14.100-2017

Engineering Drawing Practices

Elevators and Escalators

A17.1-2016/CSA B44-16

Safety Code for Elevators and Escalators

A17.2-2017

Guide for Inspection of Elevators, Escalators, and Moving Walks

A17.3-2017

Safety Code for Existing Elevators and Escalators A17.3 - 2017

TR A17.1-8.4-2013

Guide for Elevator Seismic Design (Technical Report) (TR A17.1-8.4 - 2013)

Energy Conversion

PTB-7-2014

Criteria for Shell-and-Tube Heat Exchangers According to Part UHX of ASME Section VIII-Division 1 (PTB-7 - 2014)

Energy Efficiency

EA-2G-2010

Guidance for ASME EA-2, Energy Assessment for Pumping Systems [ANSI designation: ASME TR EA-2G-2010] (EA-2G - 2010)

EA-3G-2010

Guidance for ASME EA-3, Energy Assessment for Steam Systems [ANSI designation: ASME TR EA-3G-2010] (EA-3G - 2010)

EA-4-2010

Energy Assessment for Compressed Air Systems (EA-4 - 2010)

EA-4G-2010

Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems [ANSI designation: ASME TR EA-4G-2010] (EA-4G - 2010)

PTC 53-2018

Mechanical and Thermal Energy Storage Systems [Draft Standard for Trial Use]

Engineering & Industrial Management

QAI-1-2018

Qualifications for Authorized Inspection

Environmental Engineering

B133.8-2011

Gas Turbine Installation Sound Emissions

Escalators

A17.4-2015

Guide for Emergency Personnel (A17.4 - 2015)

A17.5-1996

Elevator And Escalator Electrical Equipment (A17.5 - 1996)

A17.6-2017

Standard for Elevator Suspension, Compensation, and Governor Systems

QEI-1-2018

Standard for the Qualification of Elevator Inspectors

Fasteners

B16.15-2018

Cast Copper Alloy Threaded Fittings: Classes 125 and 250

B18.1.1-1972

Small Solid Rivets (B18.1.1 - 1972)

B18.1.2-1972

Large Rivets (B18.1.2 - 1972)

B18.2.2-2015

Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series)

B18.2.3.2M-2005

Metric Formed Hex Screws (B18.2.3.2M - 2005)

B18.2.3.4M-2001

Metric Hex Flange Screws (B18.2.3.4M - 2001)

B18.2.3.5M-1979

Metric Hex Bolts (B18.2.3.5M - 1979)

B18.2.3.6M-1979

Metric Heavy Hex Bolts (B18.2.3.6M - 1979)

B18.2.3.9M-2001

Metric Heavy Hex Flange Screws (B18.2.3.9M - 2001)

B18.2.4.3M-1979

Metric Slotted Hex Nuts (B18.2.4.3M - 1979)

B18.2.5M-2013

Metric 12-Point Flange Head Screws (B18.2.5M - 2013)

B18.2.6M-2012

Metric Fasteners for Use in Structural Applications (B18.2.6M - 2012)

B18.2.7.1M-2002

Metric 12-Spline Flange Screws (B18.2.7.1M - 2002)

B18.2.8-1999

Clearance Holes for Bolts Screws and Studs (B18.2.8 - 1999)

B18.3-2012

Socket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series) (B18.3 - 2012)

B18.5-2012

Round Head Bolts (Inch Series) (B18.5 - 2012)

B18.5.2.1M-2006

Metric Round Head Short Square Neck Bolts (B18.5.2.1M - 2006)

B18.5.2.2M-1982

Metric Round Head Square Neck Bolts (B18.5.2.2M - 1982)

B18.6.1-1981

Wood Screws (Inch Series) (B18.6.1 - 1981)

B18.6.3-2013

Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series) (B18.6.3 - 2013)

B18.6.8-2010

Thumb Screws and Wing Screws (Inch Series) (B18.6.8 - 2010)

B18.6.9-2010

Wing Nuts (Inch Series) (B18.6.9 - 2010)

B18.7-2007

General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets, and End Caps (B18.7 - 2007)

B18.7.1M-2007

Metric General Purpose Semi-Tubular Rivets (B18.7.1M - 2007)

B18.8.1-2014

Clevis Pins and Cotter Pins (Inch Series) (B18.8.1 - 2014)

B18.8.2-2000

Taper Pins, Dowel Pins, Straight Pins, Grooved Pins, and Spring Pins (Inch Series) (B18.8.2 - 2000)

B18.9-2012

Plow Bolts (B18.9 - 2012)

B18.11-1961

Miniature Screws (B18.11 - 1961)

B18.12-2012

Glossary of Terms for Mechanical Fasteners (B18.12 - 2012)

B18.13-2017

Screw and Washer Assemblies--SEMS (Inch Series)

B18.13.1M-2011

Screw and Washer Assemblies: SEMS (Metric Series) (B18.13.1M - 2011)

B18.16.4-2008

Serrated Hex Flange Locknuts: 90,000 psi (Inch Series)

B18.16.6-2017

Prevailing Torque Locknuts (Inch Series)

B18.16M-2004

Prevailing-Torque-Type Steel Metric Hex Nuts and Hex Flange Nuts (B18.16M - 2004)

B18.18-2017

Quality Assurance for Fasteners

B18.21.1-2009

Washers: Helical Spring-Lock, Tooth Lock, and Plain Washers (Inch Series) (B18.21.1 - 2009)

B18.21.2M-1999

Lock Washers (Metric Series) (B18.21.2M - 1999)

B18.22M-1981

Metric Plain Washers (B18.22M - 1981)

B18.24-2015

Part Identifying Number (PIN) Code System Standard for B18 Fastener Products

B18.29.1-2010

Helical Coil Screw Thread Inserts--Free Running and Screw Locking (Inch Series) (B18.29.1 - 2010)

B18.29.2M-2005

Helical Coil Screw Thread Inserts: Free Running and Screw Locking (Metric Series) (B18.29.2M - 2005)

B18.30.1M-2000

Open-End Blind Rivets with Break Mandrels (Metric Series) (B18.30.1M - 2000)

B18.31.1M-2008

Metric Continuous and Double-End Studs (B18.31.1M - 2008)

B18.31.3-2014

Threaded Rods (Inch Series) (B18.31.3 - 2014)

B18.31.4M-2009

Threaded Rod (Metric Series) (B18.31.4M - 2009)

B18.31.5-2011

Bent Bolts (Inch Series) (B18.31.5 - 2011)

B27.6-1972

General Purpose Uniform Cross Section Spiral Retaining Rings

B27.7-1977

General Purpose Tapered and Reduced Cross Section Retaining Rings, Metric

Flanges

B16.36-2015

Orifice Flanges

B16.47-2017

Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard

Flow Measurement

MFC-1-2014

Glossary of Terms Used in the Measurement of Fluid Flow in Pipes (MFC-1 - 2014)

MFC-1M-2003

Glossary of Terms used in the Measurement of Fluid Flow in Pipes (MFC-1M - 2003)

MFC-2M-1983

Measurement Uncertainty for Fluid Flow in Closed Conduits (MFC-2M - 1983)

MFC-3M-1989

Measurement Of Fluid Flow In Pipes Using Orifice, Nozzle & Venturi (MFC-3M - 1989)

MFC-4M-1986

Measurement of Gas Flow by Turbine Meters (MFC-4M - 1986)

MFC-6-2013

Measurement of Fluid Flow in Pipes Using Vortex Flowmeters (MFC-6 - 2013)

MFC-7-2016

Measurement of Gas Flow by Means of Critical Flow Venturis and Critical Flow Nozzles

MFC-7M-1987

Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles (MFC-7M - 1987)

MFC-8M-2001

Fluid Flow in Closed Conduits: Connections for Pressure Signal Transmissions Between Primary & Secondary Devices (MFC-8M - 2001)

MFC-9M-1988

Measurement of Liquid Flow in Closed Conduits by Weighing Method (MFC-9M - 1988)

MFC-10M-2000

Method for Establishing Installation Effects on Flow Meters (MFC-10M - 2000)

MFC-11-2006

Measurement of Fluid Flow by Means of Coriolis Mass Flowmeters (MFC-11 - 2006)

MFC-12M-2006

Measurement of Fluid Flow in Closed Conduits Using Multiport Averaging Pitot Primary Elements (MFC-12M - 2006)

MFC-13M-2006

Measurement of Fluid Flow in Closed Conduits: Tracer Methods (MFC-13M - 2006)

MFC-14M-2003(R2018)

Measurement of Fluid Flow Using Small Bore Precision Orifice Meters (MFC-14M - 2003)

MFC-16-2014

Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters (MFC-16 - 2014)

MFC-18M-2001

Measurement of Fluid Flow using Variable Area Meters (MFC-18M - 2001)

MFC-19G-2008

Wet Gas Flowmetering Guideline (Technical Report) (MFC-19G - 2008)

MFC-21.1-2015

MFC-21.1 - 2015 Measurement of Gas Flow by Means of Capillary Tube Thermal Mass Flowmeters and Mass Flow Controllers (MFC-21.1 - 2015)

MFC-22-2007

Measurement of Liquid by Turbine Flowmeters (MFC-22 - 2007)

Fossil Power

B31.1-2018

Power Piping

BPVC.V-2017

Nondestructive Examination

BPVC.VIII.1-2017

Rules for Construction of Pressure Vessels Division 1

BPVC.VIII.2-2017

Rules for Construction of Pressure Vessels Division 2-Alternative Rules

BPVC.VIII.3-2017

Rules for Construction of Pressure Vessels Division 3-Alternative Rules for Construction of High Pressure Vessels

BPVC.X-2017

Fiber-Reinforced Plastic Pressure Vessels

BPVC.XII-2017

Rules for Construction and Continued Service of Transport Tanks

PCC-1-2013

Guidelines for Pressure Boundary Bolted Flange Joint Assembly (PCC-1 - 2013)

PCC-3-2017

Inspection Planning Using Risk-Based Methods

POM 101-2013

Performance-Related Outage Inspections (POM 101 - 2013)

POM 102-2014

Operating Walkdowns of Power Plants (POM 102 - 2014)

PTC 4.2-1969

Coal Pulverizers (PTC 4.2 - 1969)

PTC 12.2-2010

Steam Surface Condensers (PTC 12.2 - 2010)

PTC 47-2006

Integrated Gasification Combined Cycle Power Generation Plants (PTC 47 - 2006)

PTC 47.4-2015

Power Block of an Integrated Gasification Combined Cycle Power Plant (PTC 47.4 - 2015)

RAM-1-2013

Reliability, Availability, and Maintainability of Equipment and Systems in Power Plants (RAM-1 - 2013)

RAM-2-2016

Reliability, Availability, and Maintainability Program Development Process for Existing Power Plants

TDP-1-2013

Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fuel Plants

Fuel Cell

PTC 50-2002

Fuel Cell Power Systems Performance (PTC 50 - 2002)

Gas

PTC 6.2-2011

Steam Turbines in Combined Cycles (PTC 6.2 - 2011)

STS-1-2011

Steel Stacks (STS-1 - 2011)

Gauges/Gaging

B18.2.9-2010

Straightness Gage and Gaging for Bolts and Screws (B18.2.9 - 2010)

B40.100-2013

Pressure Gauges and Gauge Attachments (B40.100 - 2013)

B40.200-2008

Thermometers, Direct Reading and Remote Reading (B40.200 - 2008)

B89.1.2M-1991

Calibration of Gage Blocks by Contact Comparison Methods, Through 20 in. and 500 mm (B89.1.2M - 1991)

B89.1.5-1998

Measurement of Plain External Diameters for use as Master Discs or Cylindrical Plug Gages (B89.1.5 - 1998)

B89.1.6-2002

Measurement of Plain Internal Diameters for use as a Master Rings or Ring Guages (B89.1.6 - 2002)

B89.1.9-2002

Gage Blocks (B89.1.9 - 2002)

B89.1.10M-2001

Dial Indicators (for Linear Measurement) (B89.1.10M - 2001)

B89.1.13-2013

Micrometers (B89.1.13 - 2013)

Geometric Dimensioning & Tolerancing

PDS-1.1-2013

Dimensioning, Tolerancing, Surface Texture, and Metrology Standards-Rules for Drawings with Incomplete Reference to Applicable Drawing Standard (PDS-1.1 - 2013)

Y14.5-2018

Dimensioning and Tolerancing

Y14.5.1M-1994

Mathematical Definition of Dimensioning and Tolerancing Principles (Y14.5.1M - 1994)

Y14.41-2012

Digital Product Definition Data Practices (Y14.41 - 2012)

Hand Tools

B107.4-2005

Driving and Spindle Ends for Portable Hand, Impact, Air and Electric Tools (Percussion Tools Excluded)

B107.17-2015

Gages and Mandrels for Wrench Openings (B107.17 - 2015)

B107.100-2010

Flat Wrenches (B107.100 - 2010)

B107.110-2012

Socket Wrenches, Handles, and Attachments (B107.110 - 2012)

B107.300-2010

Torque Instruments (B107.300 - 2010)

B107.500-2010

Pliers (B107.500 - 2010)

B107.600-2016

Screwdrivers and Screwdriver Bits

High-pressure vessels/systems

BOI-2000

Criteria of the ASME Boiler and Pressure Vessel Code Section VIII, Division 3 (BOI - 2000)

PCC-2-2015

Repair of Pressure Equipment and Piping (PCC-2 - 2015)

Hydrogen

B31.12-2014

Hydrogen Piping and Pipelines (B31.12 - 2014)

Identification Schemes

A13.1-2015

Scheme for the Identification of Piping Systems

Keys & Keyseats

B17.1-1967

Keys and Keyseats

B17.2-1967

Woodruff Keys and Keyseats

Lifts

A18.1-2017

Safety Standard for Platform Lifts and Stairway Chairlifts

A90.1-2015

Safety Standard for Belt Manlifts (A90.1 - 2015)

A120.1-2014

Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance

B18.15-2015

Forged Eyebolts (B18.15 - 2015)

B30.1-2015

Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries (B30.1 - 2015)

B30.10-2014

Hooks (B30.10 - 2014)

B30.23-2011

Personnel Lifting Systems (B30.23 - 2011)

B30.26-2015

Rigging Hardware (B30.26 - 2015)

B30.28-2015

Balance Lifting Units (B30.26 - 2015)

BTH-1-2017

Design of Below-the-Hook Lifting Devices

Limits and Fits

B4.2-1978

Preferred Metric Limits and Fits (B4.2 - 1978)

Machine Tools

B5.1M-1985

T-Slots, Their Bolts, Nuts and Tongue (B5.1M - 1985)

B5.8-2001

Chuck and Chuck Jaws (B5.8 - 2001)

B5.9-1967

Spindle Noses for Tool Room Lathes, Engine Lathes, Turret Lathes and Automatic Lathes (B5.9 - 1967)

B5.10-1994

Machine Tapers-Self Holding and Steep Taper Series (B5.10 - 1994)

B5.18-1972

Spindle Noses and Tool Shanks for Milling Machines (B5.18 - 1972)

B5.40-1977

Spindle Noses and Tool Shanks for Horizontal Boring Machines (B5.40 - 1977)

B5.48-1977

Ball Screws (B5.48 - 1977)

B5.50-2015

7/24 Taper Tool to Spindle Connection for Automatic Tool Change (B5.50 - 2015)

B5.52-2003

Power Presses: General Purpose, Single-Point Gap Type (B5.52 - 2003)

B5.55M-1994

Specification and Performance Standard Power Press Brakes (B5.55M - 1994)

B5.57-2012

Methods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers (B5.57 - 2012)

B5.60-2014

Workholding Chucks: Jaw-Type Chucks (B5.60 - 2014)

B5.61-2003

Power Presses: General Purpose, Single-Action, Straight Side Type (B5.61 - 2003)

Manufacturing & Processing

B5.62M-2016

Hollow Taper Tooling with Flange-Face Contact

B20.1-2018

Safety Standard for Conveyors and Related Equipment

B30.2-2016

Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist)

B30.13-2017

Storage/Retrieval (S/R) Machines and Associated Equipment

B30.23-2016

Personnel Lifting Systems

B30.24-2018

Container Cranes

B107.56-2018

Body Repair Tools

B107.400-2018

Striking Tools

B107.410-2018

Struck Tools

Material Placement Systems

B30.12-2011

Handling Loads Suspended from Rotorcraft (B30.12 - 2011)

B30.19-2016

Cableways

B30.27-2014

Material Placement Systems (B30.27 - 2014)

Materials Handling

PTB-8-2014

Procurement Guidelines for Metallic Materials (PTB-8 - 2014)

Mechanisms systems & devices

PASE-2014

Safety Standard for Portable Automotive Service Equipment (PASE - 2014)

Metric System

SI-1-1982

ASME Orientation and Guide for Use of SI-1 (Metric) Units-Ninth Edition (SI-1 - 1982)

Nondestructive Examination

ANDE-1-2015

ASME Nondestructive Examination and Quality Control Central Qualification and Certification Program

Nuclear

BPVC.CC.BPV-2017

Code Cases: Boilers and Pressure Vessels

BPVC.CC.NC-2017

Code Cases: Nuclear Components

BPVC.III.1.NB-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NB-Class 1 Components

BPVC.III.1.NC-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NC-Class 2 Components

BPVC.III.1.ND-2017

Rules for Constructions of Nuclear Facility Components-Division 1-Subsection ND-Class 3 Components

BPVC.III.1.NE-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NE-Class MC Components

BPVC.III.1.NF-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NF-Supports

BPVC.III.1.NG-2017

Rules for Construction of Nuclear Facility Components-Division 1-Subsection NG-Core Support Structures

BPVC.III.2-2017

Rules for Construction of Nuclear Facility Components-Division 2-Code for Concrete Reactor Vessels and Containments

BPVC.III.3-2017

Rules for Construction of Nuclear Facility Components-Divison 3-Containment Systems for Transportation and Storage of Spent Nuclear Fuel and High-Level Radioactive Material

BPVC.III.5-2017

Rules for Construction of Nuclear Facility Components-Division 5-High Temperature Reactors

BPVC.III.A-2017

Rules for Construction of Nuclear Facility Components-Division 1-Appendices

BPVC.III.NCA-2017

Rules for Constructions of Nuclear Facility Components-Subsection NCA-General Requirements for Division 1 and Division 2

BPVC.XI-2017

Rules for Inservice Inspection of Nuclear Power Plant Components

OM-2017

Operation and Maintenance of Nuclear Power Plants

QME-1-2012

Qualification of Active Mechanical Equipment Used in Nuclear Facilities (QME-1 - 2012)

Objects

B16.1-2015

Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250

B16.3-2016

Malleable Iron Threaded Fittings: Classes 150 and 300

B16.4-2016

Gray Iron Threaded Fittings: Classes 125 and 150

B16.9-2018

Factory-Made Wrought Buttwelding Fittings

B16.10-2017

Face-to-Face and End-to-End Dimensions of Valves

B16.11-2016

Forged Fittings, Socket-Welding and Threaded

B16.12-2009

Cast Iron Threaded Drainage Fittings (B16.12 - 2009)

B16.14-2018

Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads

B16.18-2018

Cast Copper Alloy Solder Joint Pressure Fittings B16.18 - 2018

B16.20-2017

Metallic Gaskets for Pipe Flanges

B16.22-2018

Wrought Copper and Copper Alloy Solder-Joint Pressure Fittings

B16.23-2016

Cast Copper Alloy Solder Joint Drainage Fittings: DWV

B16.24-2016

Cast Copper Alloy Pipe Flanges, Flanged Fittings, and Valves: Classes 150, 300, 600, 900, 1500, and 2500

B16.25-2017

Buttwelding Ends

B16.26-2018

Cast Copper Alloy Fittings for Flared Copper Tubes

B16.29-2017

Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings--DWV

B16.39-2014

Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300

B16.42-2016

Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300

B16.49-2017

Factory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems

B16.50-2018

Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings

B16.51-2018

Copper and Copper Alloy Press-Connect Pressure Fittings

B16.52-2018

Forged Nonferrous Fittings, Socket-Welding and Threaded (Titanium, Titanium Alloys, Aluminum, and Aluminum Alloys)

Operations and Maintenance

NTB-1-2013

NTB 1-Training Program Reference Material for Use with ASME/ANS RA-Sa-2009 (NTB-1 - 2013)

Passenger Cars

RT-1-2015

Safety Standard for Structural Requirements for Light Rail Vehicles (RT-1 - 2015)

Performance Test Codes

PTC 1-2015

General Instructions (PTC 1 - 2015)

PTC 2-2001

Definitions and Values Code (PTC 2 - 2001)

PTC 4-2013

Fired Steam Generators (PTC 4 - 2013)

PTC 4.3-2017

Air Heaters

PTC 6-2004

Steam Turbines (PTC 6 - 2004)

PTC 6S-1988

Procedures for Routine Performance Test of Steam Turbines (PTC 6S - 1988)

PTC 8.2-1990

Centrifugal Pumps (PTC 8.2 - 1990)

PTC 10-1997

Performance Test Code on Compressors and Exhausters (PTC 10 - 1997)

PTC 11-2008(R2018)

Fans (PTC 11 - 2008)

PTC 12.1-2015

Closed Feedwater Heaters

PTC 12.3-1997

Performance Test Code on Deaerators (PTC 12.3 - 1997)

PTC 12.4-1992

Moisture Separator Reheaters (MSRs) (PTC 12.4 - 1992)

PTC 12.5-2000

Single Phase Heat Exchangers (PTC 12.5 - 2000)

PTC 18-2011

Hydraulic Turbines and Pump-Turbines (PTC 18 - 2011)

PTC 19.2-2010

Pressure Measurement (PTC 19.2 - 2010)

PTC 19.6-2018

Electrical Power Measurements

PTC 19.23-1980

Guidance Manual for Model Testing (PTC 19.23 - 1980)

PTC 22-2014

Gas Turbines (PTC 22 - 2014)

PTC 23-2003

Atmospheric Water Cooling Equipment (PTC 23 - 2003)

PTC 30-1991

Air Cooled Heat Exchangers (ACHE) (PTC 30 - 1991)

PTC 30.1-2007

Air-Cooled Steam Condensers (PTC 30.1 - 2007)

PTC 31-2011

High-Purity Water Treatment Systems (PTC 31 - 2011)

PTC 34-2017

Waste Combustors with Energy Recovery

PTC 36-2018

Measurement of Industrial Noise

PTC 39-2005

Steam Traps (PTC 39 - 2005)

PTC 40-2017

Flue Gas Desulfurization Units

PTC 46-2015

Overall Plant Performance

PTC 47.1-2017

Cryogenic Air Separation Unit of an Integrated Gasification Combined Cycle Power Plant

PTC 70-2009

Ramp Rates (PTC 70 - 2009)

PTC PM-2010

Performance Monitoring Guidelines for Power Plants (PTC PM - 2010)

V V 10-2006

Guide for Verification and Validation in Computational Solid Mechanics (V V 10 - 2006)

V V 20-2009

Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer (V V 20 - 2009)

Petroleum

ASME B31.4-2016

B31.4 - 2016 Pipeline Transportation Systems for Liquids and Slurries

B31.8S_ES-2010

Gestión de Integridad de Sistemas de Gasoductos (Spanish) (B31.8S_ES - 2010)

Pipe Sizes

B36.10M-2018

Welded and Seamless Wrought Steel Pipe

B36.19M-2018

Stainless Steel Pipe

Pipeline and Piping

API 579-1/ASME FFS-1-2016

Fitness-For-Service

B16.5-2017

Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard

B31.3-2016

Process Piping

B31.3_ES-2010

Tuberías de proceso (Spanish) (B31.3_ES - 2010)

ASME B31.5-2016

Refrigeration Piping and Heat Transfer Components

B31.8-2018

Gas Transmission and Distribution Piping Systems

B31.11-2002

Slurry Transportation Piping Systems (B31.11 - 2002)

B31J-2017

Stress Intensification Factors (i-Factors), Flexibility Factors (k-Factors), and Their Determination for Metallic Piping Components

FFS-1-2007

Fitness-For-Service (FFS-1 - 2007)

FFS-2-2009

Fitness-for-Service Example Problem Manual (FFS-2 - 2009)

PTB-9-2014

ASME Pipeline Standards Compendium (PTB-9 - 2014)

PTC 19.3 TW-2016

Thermowells

PTC 19.5-2004

Flow Measurement (PTC 19.5 - 2004)

PTC 25-2014

Pressure Relief Devices (PTC 25 - 2014)

Pipelines

B31Q-2018

Pipeline Personnel Qualification

EA-2-2009

Energy Assessment for Pumping Systems (EA-2 - 2009)

Plumbing

A112.1.2-2012

Air Gaps in Plumbing Systemsfor Plumbing Fixtures and Water-Connected Receptors)

A112.1.3-2000

Air Gap Fittings for use with Plumbing Fixtures, Appliances, and Appurtenances

A112.3.1-2007

Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below Ground

A112.3.4/CSA B45.9-2018

Plumbing Fixtures with Pumped Waste and Macerating Toilet Systems

A112.4.1-2009

Water Heater Relief Valve Drain Tubes

A112.4.2-2009

Water Closet Personal Hygiene Devices

ASME A112.4.2/CSA B45.16-2015

Personal Hygiene Devices for Water Closets

A112.4.3-1999

Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System

A112.4.14-2004

Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems

A112.6.1M-1997

Floor Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use

A112.6.4-2003

Roof, Deck, and Balcony Drains

A112.6.7-2010

Sanitary Floor Sinks

A112.6.9-2005

Siphonic Roof Drains

A112.14.1-2003

Backwater Valves

A112.14.3-2018

Hydromechanical Grease Interceptors

A112.14.4-2001

Grease Removal Devices

A112.14.6-2010

FOGFats, Oils, and Greases) Disposal Systems

A112.18.1/CSA B125.1-2018

Plumbing Supply Fittings

ASME A112.18.2/CSA B125.2-2015

Plumbing Waste Fittings

A112.18.3-2002

Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings

A112.18.6/CSA B125.6-2009

Flexible Water Connectors

A112.18.9-2011

Protectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures

A112.19.1-2018/CSA B45.2-18

Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures

A112.19.1/CSA B45.2-2013

Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures

A112.19.2-2018/CSA B45.18

Ceramic Plumbing Fixtures

A112.19.2/CSA B45.1-2013

Ceramic Plumbing Fixtureswith Update No. 1)

A112.19.3-2000

Stainless Steel Plumbing FixturesDesigned for Residential Use)

A112.19.3/CSA B45.4-2008

Stainless Steel Plumbing Fixtures

A112.19.5/CSA B45.15-2011

Flush Valves and Spuds for Water Closets, Urinals, and Tankswith Update No.1)

A112.19.6-1995

Hydraulic Performance Requirements for Water Closets and Urinals

A112.19.7/CSA B45.10-12-2012

Hydromassage Bathtub Systems

A112.19.9M-1991

Non-Vitreous Ceramic Plumbing Fixtures

A112.19.10-2017

Retrofit Dual Flush Devices for Water Closets

ASME A112.19.12-2014

Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems

A112.19.14-2013(R2018)

Six-Liter Water Closets Equipped with a Dual Flushing Device

A112.19.15-2012

Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors

A112.19.17-2010(R2018)

Manufactured Safety Vacuum Release SystemsSVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading Pool Suction Systems

A112.19.19-2006

Vitreous China Nonwater Urinals

A112.19.19-2016

Vitreous China Nonwater Urinals

A112.21.2M-1983

Roof Drains

A112.21.3M-1985

Hydrants for Utility and Maintenance use

A112.36.2M-1991

Cleanouts

A112.1016/CSA B125.16-2011

Performance Requirements for Automatic Compensating Valves for Individual Showers and Tub/Shower Combinationswith Update No. 2)

B31.E-2008

Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems (B31E - 2008)

B31.G-2012

Manual for Determining the Remaining Strength of Corroded Pipelines (B31G - 2012)

B31.G_ES-2012

Manual para la determinación de la Resistencia remanente de tuberías corroídas (Spanish) (B31G_ES - 2012)

B31.J-2008

Standard Test Method for Determining Stress Intensification Factors (i-Factors) for Metallic Piping Components (B31J - 2008)

B31.J_ES-2008

Método de prueba estándar para determinar factores de intensificación de esfuerzo (Factores i) para componentes de tuberías metálicas (Spanish) (B31J_ES - 2008)

B31.Q-2014

Pipeline Personnel Qualification (B31Q - 2014)

B31.Q_ES-2010

Calificación del personal de líneas de tuberías (Spanish) (B31Q_ES - 2010)

B31.T-2010

Standard Toughness Requirements for Piping (B31T - 2010)

Pressure Vessels

PTB-3-2013

ASME Section VIII-Division 2 Example Problem Manual (PTB-3 - 2013)

PTB-5-2013

ASME Section VIII-Division 3 Example Problem Manual (PTB-5 - 2013)

PTB-6-2013

Guidelines for Strain Gaging of Pressure Vessels Subjected to External Pressure Loading in the PVHO-1 Standard (PTB-6 - 2013)

Pumps

B73.1-2012

Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process (B73.1 - 2012)

B73.2-2016

Specification for Vertical In-Line Centrifugal Pumps for Chemical Process

B73.3-2015

Specification for Sealless Horizontal End Suction Centrifugal Pumps for Chemical Process (B73.3 - 2015)

B73.5M-1995

Thermoplastic/Thermoset Polymer Material Horizontal End Suction Centrifugal Pumps Chemical Process (B73.5M - 1995)

Quality

NQA-1-2017

Quality Assurance Requirements for Nuclear Facility Applications

Rail Transportation

B18.10-2006

Track Bolts and Nuts (B18.10 - 2006)

RT-2-2014

Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles (RT-2 - 2014)

Y32.7-1972

Graphics Symbols for Railroad Maps and Profiles (Y32.7 - 1972)

Reinforced Thermo Plastic Corrosion Resistance

RTP-1-2017

Reinforced Thermoset Plastic Corrosion-Resistant Equipment

Renewable Energy

PTC 29-2005

Speed Governing Systems for Hydraulic Turbine Generator Units (PTC 29 - 2005)

Risk Analysis and Assessment

B31.8S-2018

Managing System Integrity of Gas Pipelines

B89.7.4.1-2005

Measurement Uncertainty and Conformance Testing: Risk Analysis (An ASME Technical Report) (B89.7.4.1 - 2005)

RA-S-1.3-2017

Standard for Radiological Accident Offsite Consequence Analysis (Level 3 PRA) to Support Nuclear Installation Applications

Screw Threads

B1.1-2003(R2018)

Unified Inch Screw Threads, (UN and UNR Thread Form) (B1.1 - 2003)

B1.2-1983

Gages and Gaging for Unified Inch Screw Threads (B1.2 - 1983)

B1.3-2007

Screw Thread Gaging Systems for Acceptability: Inch and Metric Screw Threads (UN, UNR, UNJ, M, and MJ) (B1.3 - 2007)

B1.3M-1992

Screw Thread Gaging Systems for Dimensional Acceptability - Inch Metric Screw Threads (UN UNR UNJ, M & MJ] (B1.3M - 1992)

B1.5-1997

Acme Screw Threads (B1.5 - 1997)

B1.7-2006

Screw Threads: Nomenclature, Definitions, and Letter Symbols (B1.7 - 2006)

B1.8-1988

Stub Acme Screw Threads (B1.8 - 1988)

B1.9-1973

Buttress Inch Screw Threads (7 deg./45 deg. Form with 0.6 Pitch Basic Height of Thread Engagement) (B1.9 - 1973)

B1.10M-2004

Unified Miniature Screw Threads (B1.10M - 2004)

B1.11-1958

Microscope Objective Thread (B1.11 - 1958)

B1.12-1987(R2018)

Class 5 Interference-Fit Thread (B1.12 - 1987)

B1.13M-2005

Metric Screw Threads: M Profile (B1.13M - 2005)

B1.15-1995

Unified Inch Screw Threads, (UNJ Thread Form) (B1.15 - 1995)

B1.16M-1984

Gages and Gaging for Metric M Screw Threads (B1.16M - 1984)

B1.20.1-2013

Pipe Threads, General Purpose, Inch (B1.20.1 - 2013)

B1.20.2M-2006

Pipe Threads, 60 deg. General Purpose (Metric) (B1.20.2M - 2006)

B1.20.5-1991

Gaging for Dryseal Pipe Threads-Inch (B1.20.5 - 1991)

B1.20.7-1991(R2018)

Hose Coupling Screw Threads, Inch (B1.20.7 - 1991)

B1.21M-1997(R2018)

Metric Screw Threads: MJ Profile (B1.21M - 1997)

B1.22M-1985

Gages and Gaging for MJ Metric Screw Threads (B1.22M - 1985)

B1.30-2002

Screw Threads: Standard Practice for Calculating and Rounding Dimensions (B1.30 - 2002)

B47.1-2007

Gage Blanks (B47.1 - 2007)

Surface Quality

B46.1-2009

Surface Texture (Surface Roughness, Waviness, and Lay) ( - 2009)

Y14.36M-1996

Surface Texture Symbols (Y14.36M - 1996)

Symbols

Y32.4-1977

Graphic Symbols for Plumbing Fixtures for Diagrams Used in Architecture & Building Construction (Y32.4 - 1977)

Y32.10-1967

Graphic Symbols for Fluid Power Diagrams (Y32.10 - 1967)

Y32.18-1972

Symbols For Mechanical And Acoustical Elements As Used In Schematic Diagrams (Y32.18 - 1972)

Testing

PTC 19.1-2013

Test Uncertainty (PTC 19.1 - 2013)

Uncertainty

B89.7.3.2-2007

Guidelines for the Evaluation of Dimensional Measurement Uncertainty (Technical Report) (B89.7.3.2 - 2007)

B89.7.3.3-2002

Guidelines for Assessing the Reliability of Dimensional Measurement Uncertainty Statements (B89.7.3.3 - 2002)

Valves

B16.33-2012

Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 175 psi (Sizes NPS 1/2 through NPS 2) (B16.33 - 2012)

B16.34-2013

Valves Flanged, Threaded and Welding End

B16.38-2012

Large Metallic Valves for Gas Distribution: Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum (B16.38 - 2012)

B16.40-2019

Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems

B16.44-2012

Manually Operated Metallic Gas Valves for Use in Above Ground Piping Systems up to 5 psi (B16.44 - 2012)

Verification & Validation

V V 10.1-2012

An Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics (V V 10.1 - 2012)

Water Resources Engineering

A112.18.8-2009

In-Line Sanitary Waste Valves for Plumbing Drainage Systems